Don, your question is valid but I’m afraid I don’t have a good answer. I
honestly don’t know if this is a recent occurrence or if it has always been
there because I have practically no run time on the KPA100 since I built it. I
have put the KDSP2 in bypass and that does fix the problem, as lon
Mike,
With the blue toroids, you do have the updated KPA100. Can I assume
that this problem is a recent occurrence rather than a problem that has
always been there?
Yes, removing and jumpering out the KDSP2 will likely stop it (or just
try putting it in bypass), but that is not the source o
Thanks for the quick reply Don! I checked the 8R setting and it was indeed set
to hold (and is set there again after toggling it to make sure). I do have the
KDSP2 option with the KPA100, but after peeling off the right side panel I see
two baby blue toroids. The K2 is serial number is 5882 a
Mike,
I am curious to hear just how long ago that "some time ago" really is.
The first thing to check is the setting of 8R - it should be set to HOLD
with the KPA100 installed. To check, go in the menu to T-R, edit the
parameter and then tap DISPLAY. If 8R was already set to HOLD, you will
Hi all,
I have a K2 that I built some time ago that I added the KPA100 to at a later
time. I don’t have more than 10 minutes worth of run time on the KPA100 and
I’m putting a dress rehearsal together for Field Day in a couple of weeks. I
noticed tonight that when I am running more than about 1
5 matches
Mail list logo