Should the Orion or Kenwood mode be selected when using the K3 with SteppIR's
SDA-100 controller? Can't get it to work with either mode, just thought I would
check with the list.
Thanks!
Jack - WE5ST
__
Elecraft mailing list
Home:
Elecraft uses a modified Kenwood protocol.
Have you enabled AI mode in the K3 and is a logging program running?
What cable are you using to connect the K3 to SDA-100?
Is the SDA-100 Auto mode turned on?
73,
... Joe, W4TV
On 11/25/2011 4:27 PM, Jack Berry wrote:
Should the Orion or
!
From: Joe Subich, W4TV li...@subich.com
To: Jack Berry jlbe...@yahoo.com; Elecraft Reflector
elecraft@mailman.qth.net
Sent: Fri, November 25, 2011 3:33:09 PM
Subject: Re: [Elecraft] K3/SteppIR setup
Elecraft uses a modified Kenwood protocol.
Have you enabled AI mode in the K3
logger and controller but not
worried
about that yet.
Tell me about AI, can't find that in the manual.
Thanks!
From: Joe Subich, W4TV lt;lists@gt;
To: Jack Berry lt;jlberry@gt;; Elecraft Reflector
lt;elecraft@.qthgt;
Sent: Fri, November 25, 2011 3:33:09 PM
Subject: Re: [Elecraft] K3
!
From: Joe Subich, W4TVli...@subich.com
To: Jack Berryjlbe...@yahoo.com; Elecraft Reflector
elecraft@mailman.qth.net
Sent: Fri, November 25, 2011 3:33:09 PM
Subject: Re: [Elecraft] K3/SteppIR setup
Elecraft uses a modified Kenwood protocol.
Have you enabled AI mode in the K3
, November 25, 2011 4:04:16 PM
Subject: Re: [Elecraft] K3/SteppIR setup
On 11/25/2011 4:41 PM, Jack Berry wrote:
Cable from SteppIR is the S-13.
The S-13 cable has a problem ... disconnect the wire at pin 7 on
the transceiver end. SteppIR loops a TTL copy of RxD out on pin
7 and back in on pin 7
6 matches
Mail list logo
