In a recent message, Alexandr Kobranov <[EMAIL PROTECTED]> wrote ...
want to know if i missed something:
- when on CW mode turning SHIFT to low-end it is going to 0.00 and then
jump to 2.7 and radio is "off"
No, you are not missing anything, L., I am getting exactly the same as
you in CW mod
Ok Ken,
thanks,
will go through later - maybe there are some other params to check.
And reload FW :-)
Thanks for now,
73!
L. -dst-
K3/10 #727
Ken K3IU napsal(a):
I can not duplicate this on #202 with the latest firmware. It stops at
FC=0.10 even if I keep rotating the knob anti-clockwise.
73
I can not duplicate this on #202 with the latest firmware. It stops at
FC=0.10 even if I keep rotating the knob anti-clockwise.
73,
Ken K3IU
Alexandr Kobranov wrote:
Hello friends,
want to know if i missed something:
- when on CW mode turning SHIFT to low-end it is going to 0.00 and
then jump
Hello friends,
want to know if i missed something:
- when on CW mode turning SHIFT to low-end it is going to 0.00 and
then jump to 2.7 and radio is "off" (no signal like I/F switched off).
It is for BANDWIDTH 2.8kHz and the same for 0.05kHz so bandwidth
independent.
On SSB mode SHIFT is going
4 matches
Mail list logo