You can also put the USB key / ptt into Safe Mode. See the instructions
in MCU 5.33 release notes (or any release notes later than this rev).
73,
matt W6NIA
On 11/28/2016 3:29 PM, Fred Jensen wrote:
Hmmm ... my original message was on 31 Oct -- Long Delay Echo?
Problem was the PTT-KEY
Hmmm ... my original message was on 31 Oct -- Long Delay Echo?
Problem was the PTT-KEY setting -- PTT was set to DSR and it gets
asserted intermittently as the radio and computer USB port argue when
the radio comes on. Apparently the radio eventually wins because it
stops. OFF-OFF
Fred,
I never see that on remote. Only if I'm using N1MM for DTR CW keying and
booting a PC.
I exclusively use the USB cable for Radio Control and Winkey CW
Keying/RTTY. No issues with that.
73, Gerry W1VE
Gerry Hull, W1VE | Hancock, NH USA | +1-603-499-7373
AKA: VE1RM | VY2CDX | VO1CDX |
Fred,
The cause might be the initialisation of the com port connected to the
K3 (PTT and KEY on pins of RTS and DTR, = pins 4 and 7).
73
Arie PA3A
Op 31-10-2016 om 5:15 schreef Fred Jensen:
This may not be new, I often pay no attention to the radio if I power
it up, but recently I've
This may not be new, I often pay no attention to the radio if I power it
up, but recently I've noticed that it's going into TX multiple times as
the start-up display scrolls by on VFO B. I don't think it's making any RF.
FWIW: I do operate W7RN remote using RemoteRig which immediately puts
5 matches
Mail list logo
