Well K3 #850 is alive and well. Only two problems, KBPF3 filter PCB had L18
snapped off and one lead was cut. So I unsoldered the remaining lead,
rewound it, resoldered it to the board, and installed the board at the same
time as the KPA3. The other problem was a small scratch on the bottom
: [Elecraft] K3 #850 is alive
Well K3 #850 is alive and well. Only two problems, KBPF3 filter PCB had
L18 snapped off and one lead was cut. So I unsoldered the remaining lead,
rewound it, resoldered it to the board, and installed the board at the
same time as the KPA3. The other problem was a small
Hi Jim,
Yes, Wayne says they are going to support L18 with some RTV or something
similar like the ones on the PA.
In a weird way I think this was meant to be, I haven't built one of Wayne's
rigs yet without winding a toriod, hihi.
73 de jay/w5jay..
The broken wire on the toroid seems to
3 matches
Mail list logo