My objective is to use all of this equipment simultaneously providing there
is a way for all devices to receive the necessary data needed for operation.
I'm interested in having the SteppIR vertical and a wire antenna fed with
450 Ohm ladder line available at all times on the same or different
Tim,
The K3 with the SteppIR and MicroKeyer 2 will cause no problems - the
SteppIR does not transmit anything on the RS-232 bus, it simply
listens. The MicroHam connects to the StepIR and the K3 connects from
the SteppIR pass-thru to the K3.
I am not familiar with the Palstar AT-AUTO, so I
Tim -
I have a SteppIR yagi, and I ordered the 02114 cable from SteppIR to use
with the K3. The ICOM cable won't work. I don't use it, but I'd guess
you would go from the data out jack to any other device you wanted to
control.
73, Mike NF4L
w8jj wrote:
My objective is to use all of this
,
... Joe, W4TV
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of w8jj
Sent: Wednesday, December 23, 2009 10:04 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 + Palstar AT-AUTO + SteppIR Vertical
4 matches
Mail list logo
