Wayne,
here's perhaps an idea: the K3 should load the memory as soon as you hit
M->V button, then
as you tune VFO-A it will load each memory number as you spin the VFO ...
This allows to receive on that memory as you spin it
- Wim
wayne burdick wrote:
>
>> ...unlike most other transceivers th
]>
To:
Sent: Friday, October 03, 2008 12:43 PM
Subject: Re: [Elecraft] K3 - 60M channel storage and recall
Tony
Channelised operation with the K3 is a mess, unlike most other
transceivers the K3 currently lacks ability to switch stored channels
(with instant receive) in the manner of a cr
Dave G4AON wrote:
>
> Tony
>
> Channelised operation with the K3 is a mess, unlike most other
> transceivers the K3 currently lacks ability to switch stored channels
> (with instant receive) in the manner of a crystal controlled
> transceiver. There is no simpler way other than to use a TS5
Tony
Channelised operation with the K3 is a mess, unlike most other
transceivers the K3 currently lacks ability to switch stored channels
(with instant receive) in the manner of a crystal controlled
transceiver. There is no simpler way other than to use a TS570 or TS480,
etc.
73 Dave, G4AON
I programmed the five 60M channels into memories 00-04. So I have to use
M>V, rotate VFO A to the channel I want, then hit M>V again.
Is there a simpler way to do this?
Tnx
N2TK, Tony
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must b
5 matches
Mail list logo