Hi Joe.
Yes, I am also awaiting this firmware update. I have not yet got my K3, but
my hopes are that it will be ready soon. Right now I am also using the
IC-756pro3, microphone are the TSM MT-57 dynamic, and I use the W2IHY
equalizer into the rear ACC connector. I have also ordered a better
Any update on when the ESSB function will be turned on in the
firmware? I am using the 2.7 filter with various dynamic microphones
and getting good audio reports, but not as good as I get from my Icom
756 PRO III. Would like to try a little wider bandwidth (about 3.0)
and see if I can match the
Every time I see the term ESSB I see red. I wonder if these folks
have ever read FCC Part 97.307 (a) Emission Standards:
(a) No amateur station transmission shall occupy more bandwidth than
necessary for the information rate and emission type being
transmitted, in accordance with good
Every time I see the term ESSB I see red. I wonder if these folks have
ever read FCC Part 97.307 (a) Emission Standards:
(a) No amateur station transmission shall occupy more bandwidth than
necessary for the information rate and emission type being transmitted, in
accordance with good
PROTECTED]
To: elecraft@mailman.qth.net
Sent: Thursday, May 29, 2008 10:24 AM
Subject: [Elecraft] K3 - ESSB Availability
Every time I see the term ESSB I see red. I wonder if these folks
have ever read FCC Part 97.307 (a) Emission Standards:
(a) No amateur station transmission shall occupy more
Hello Bill,
Well said Sir :-)
73,
Geoff
GM4ESD
Every time I see the term ESSB I see red. I wonder if these folks
have ever read FCC Part 97.307 (a) Emission Standards:
(a) No amateur station transmission shall occupy more bandwidth than
necessary for the information rate and emission
Guys, lets nip this thread before it roars to life again. ;-)
A quick search of the archives will bring all of the past pro/con ESSB
discussions to light in excruciating detail.
73, Eric WA6HHQ Elecraft list moderator
Paul Christensen wrote:
Every time I see the term ESSB I see red.
7 matches
Mail list logo