that responded!
73,
Mitch DJØQN
- Original Message -
From: "Bill W4ZV" <[EMAIL PROTECTED]>
To:
Sent: Thursday, October 30, 2008 1:19 PM
Subject: Re: [Elecraft] K3 - KRX3: AF Gain
Mitch Wolfson DJØQN wrote:
Now I notice that my KRX3 sensitivity is much low
Now I notice that my KRX3 sensitivity is much lower than the main
receiver, which wasn't the case when I installed it...
Check your XFIL gain settings in the SUB vs MAIN...
Also, double check the KRX3 antenna selection. When mine went nearly
deaf, it was because I managed to unwittingly put
Mitch Wolfson DJØQN wrote:
>
>
> Now I notice that my KRX3 sensitivity is much lower than the main
> receiver,
> which wasn't the case when I installed it. I will try to figure that
> problem
> out on my own or otherwise contact support.
>
Check your XFIL gain settings in the SUB vs MAIN.
"Mitch Wolfson DJØQN" <[EMAIL PROTECTED]>
> Cc:
> Sent: Wednesday, October 29, 2008 1:43 AM
> Subject: Re: [Elecraft] K3 - KRX3: AF Gain
>
>
>> Hello Mitch!
>>
>>> I have the main receiver's AF Gain set to HI, but I can't find
a way
-
From: "Lyle Johnson" <[EMAIL PROTECTED]>
To: "Mitch Wolfson DJØQN" <[EMAIL PROTECTED]>
Cc:
Sent: Wednesday, October 29, 2008 1:43 AM
Subject: Re: [Elecraft] K3 - KRX3: AF Gain
Hello Mitch!
I have the main receiver's AF Gain set to HI, but I can't find
Hello Mitch!
I have the main receiver's AF Gain set to HI, but I can't find a way to
enable that function on the KRX3. Am I missing something, or is this a
feature request?
Setting the AF GAIn HI or LO in the CONFIG menu sends the appropriate
commands to both main and sub receivers if the KR
I have the main receiver's AF Gain set to HI, but I can't find a way to
enable that function on the KRX3. Am I missing something, or is this a
feature request?
With the main receiver on HI, the difference between the two receivers is
too great to be able to hear very well on the KRX3, at least
7 matches
Mail list logo