[Elecraft] K3 - internal TX PWR meter accuracy?

My K3's power reading matches ... within Bird's published %/HF element accuracy ... that of my Bird(s). Ken Kopp - K0PP K3 #56 K2 #5665 [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to

Re: [Elecraft] K3 - internal TX PWR meter accuracy?

Hi Glenn: Without claiming accuracy to any traceable standard, I just fired up my trusty old 100 MHz HP 1740A O-scope, calibrated the display to the built-in 1 volt calibration standard, and measured the P-P voltage into a 51 ohm resistance (no measurable reactance). At 100 watts commanded an

Re: [Elecraft] K3 - internal TX PWR meter accuracy?

ON4WIX wrote: > > > I was just wondering if anyone has done TX power measurements with > precision > measuring gear and compared these measurements against the K3's internal > indication of the output power? > > Using N8LP's LP-100 (factory calibration) after calibrating at 50W per the ma

[Elecraft] K3 - internal TX PWR meter accuracy?

Hi group, I was just wondering if anyone has done TX power measurements with precision measuring gear and compared these measurements against the K3's internal indication of the output power? Just curious here. The K3/100 is advertized as a 100W transceiver (or should that be "100W class"?) an