How do I set the radio to turn on the fans when then 100 w amp temp gets to
a specific temperature. I am playing around with the RTTY contest -
running 70 watts output into a tuned antenna.
With KPA3 set to NOR, the fans do not seem to turn on, even when the 100W
amp gets to high. I know the fans
Irwin,
Yes, I think that PA Temp setting *may* be too high, but it 'all depends'.
The PA Temp indication will follow the actual temperature of the
heatsink, so if your K3 has been on for a while, that 27 degC may be normal.
Follow the instructions in the manual to set the temperature.
First tur
Thanks. I will reset the PA Temp to a lower setting. I am finding that once
the PA temp gets to 27C, it shuts the 100w amp off and I only get 10W out
of the radio until it cools down. Even at 70W output in RTTY, I should be
able to keep the temp down with the fans? I am wondering if I have
somethin
Irwin,
The PA temp calibration is, as Don already stated, in the manual.
Just wondering, do your fans actually run?
The fans can be tested in de menu: KPA3.
If set to 'PA nor' then the fans are temp controlled.
If you turn the main dial, PA Fn1 - Fn4 will come on the display, You
should hear
4 matches
Mail list logo