On Fri,12/26/2014 5:26 PM, Jorge Diez - CX6VM wrote:
I appreciate information also. I am using K3 + N1MM + MMTTY + Tascam
soundcard and can RX but I couldn´t transmit on the K3
Hello Jorge,
How do you put the K3 in TX mode? There are two ways -- VOX or via an
additional serial port? I use V
der (PA0PJE) [mailto:pa0...@xs4all.nl]
>Enviado el: sábado, 27 de diciembre de 2014 11:27 a.m.
>Para: Jorge Diez - CX6VM; Elecraft@mailman.qth.net
>Asunto: Re: [Elecraft] K3 RTTY-CW Help
>
>Try this one, Jorge,
>
>http://www.n3me.net/pdf%20files/MMTTY%20v1.68A%20and%20Elecraft%20
- CX6VM; Elecraft@mailman.qth.net
Asunto: Re: [Elecraft] K3 RTTY-CW Help
Try this one, Jorge,
http://www.n3me.net/pdf%20files/MMTTY%20v1.68A%20and%20Elecraft%20K3%20Setup%20with%20Lenovo.pdf
Otherwise you could just use
http://www.n3me.net/pdf%20files/
and pick the file you want to use.
Dell was
-Mensaje original-
De: Peter Eijlander (PA0PJE) [mailto:pa0...@xs4all.nl]
Enviado el: sábado, 27 de diciembre de 2014 11:27 a.m.
Para: Jorge Diez - CX6VM; Elecraft@mailman.qth.net
Asunto: Re: [Elecraft] K3 RTTY-CW Help
Try this one, Jorge,
http://www.n3me.net/pdf%20files/MMTTY
: Re: [Elecraft] K3 RTTY-CW Help
Try this one, Jorge,
http://www.n3me.net/pdf%20files/MMTTY%20v1.68A%20and%20Elecraft%20K3%20Setup%20with%20Lenovo.pdf
Otherwise you could just use
http://www.n3me.net/pdf%20files/
and pick the file you want to use.
Dell was no longer there in the file name... that
Try this one, Jorge,
http://www.n3me.net/pdf%20files/MMTTY%20v1.68A%20and%20Elecraft%20K3%20Setup%20with%20Lenovo.pdf
Otherwise you could just use
http://www.n3me.net/pdf%20files/
and pick the file you want to use.
Dell was no longer there in the file name... that why it didn't work.
73,
Peter
-
De: Bruce & Gab [mailto:ockm...@verizon.net]
Enviado el: sábado, 27 de diciembre de 2014 12:15 a.m.
Para: 'Jorge Diez - CX6VM'; Elecraft@mailman.qth.net
Asunto: RE: [Elecraft] K3 RTTY-CW Help
http://www.n3me.net/howto.htm
Here is another link with step by step instructions for N1M
: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jorge
Diez - CX6VM
Sent: Friday, December 26, 2014 20:26
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 RTTY-CW Help
Hello
I appreciate information also. I am using K3 + N1MM + MMTTY + Tascam
soundcard and can RX but
] En nombre de Bruce &
Gab
Enviado el: viernes, 26 de diciembre de 2014 04:29 p.m.
Para: 'Steve Lett'; Elecraft@mailman.qth.net
Asunto: Re: [Elecraft] K3 RTTY-CW Help
http://www.k5nd.net/2013/08/fsk-interface/
Check out K5NDs link above. He shows a simple schematic for a RTTY (FSK)
Steve:
I too am a new owner of a k3 kit and just got it going couple of weeks
ago. You will enjoy this radio. I too will be looking at N1MM, etc
so can operate via keyboard part of the time during contests.
In the meantime, regarding RTTY, why don't you try using your CW paddle
to send and t
Behalf Of Steve
Lett
Sent: Friday, December 26, 2014 13:18
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K3 RTTY-CW Help
I have a new K3. I very much like the quality of this radio but it is over
my non-technical head. Are there step-by-step instructions that would tell
me how to configure the
I have a new K3. I very much like the quality of this radio but it is over
my non-technical head. Are there step-by-step instructions that would tell
me how to configure the radio for RTTY using MMTTY software? I am also
looking for easy to follow instructions to configure CW using CWDecoder
softwa
12 matches
Mail list logo
