On Fri, 05 Mar 2010 01:26:31 +, Lance Collister wrote:
>I can't imagine trying to use the computer during a SSB contest or for
>meteor scatter without the ability to interrupt it. The programs I have used
>for
>this look for an interrupt via the serial port's DSR line.
I can't imagine NOT
Thanks Jim1
I'll play with it tonight and see what happens...
Had someone OTA help with levels using the sound card recordings, had REALLY
backed off on the card gain.
GL this weekend!
73,
Julius
Julius Fazekas
N2WN
Tennessee Contest Group
http://www.k4ro.net/tcg/index.html
http://groups.goog
On 3/5/2010 12:14 AM, Jim Brown wrote:
> On Thu, 4 Mar 2010 11:14:39 -0800 (PST), Julius Fazekas n2wn wrote:
>
>> The sound card output was connected to the K3 MIC MONO on the rear panel,
>
> That's your problem -- you should be driving the LINE IN of the K3, not the
> MIC IN. Then set the K3 to M
On Thu, 4 Mar 2010 11:14:39 -0800 (PST), Julius Fazekas n2wn wrote:
>The sound card output was connected to the K3 MIC MONO on the rear panel,
That's your problem -- you should be driving the LINE IN of the K3, not the
MIC IN. Then set the K3 to MIC + LIN to use both your live mic and the
comp
HC-4 is plugged into the sound card MIC IN, straight connection, no adapter.
It works fine, can record and audio is good.
The sound card output was connected to the K3 MIC MONO on the rear panel,
with rP.H selected in config. I did this based on N1MM setup information. I
used a stock 1/8" stereo
on the K3 (1/8" mono).
Dave Hachadorian, K6LL
Yuma, AZ
--
From: "Julius Fazekas n2wn"
Sent: Thursday, March 04, 2010 10:46 AM
To:
Subject: Re: [Elecraft] K3 Stereo mic plug into rear panel mic
(mono) jack! Okor not? PTT or VOX
I use a foot switch, but mostly so I can mutter between QSOs ;o)
I have a problem with the soundcard to K3 connection. When I use the rear
mic jack, I get a low level squeal/tone . I do not have this when I use the
front mic jack. Both are set High... I'm using a stereo cable, which works
fine. T
On Wed, 3 Mar 2010 20:58:46 -0700, Dave Hachadorian wrote:
>If your logging software supports it, consider plugging your mike
>into the soundcard mic input and routing sound card output to the
>K3's LINE IN. That way the mic is muted while wav is playing, and
>you can slurp coffee, etc. without
> My first thoughts are that PTT might avoid problems re: setting
> of VOX:GN,
> DELAY and ANTVOX!
You're not going to have any problem setting up the vox,
especially since you are using a fairly well isolated headset.
The K3 has about the smoothest vox operation I've seen. Then
again, I'm bia
9 matches
Mail list logo
