Hi,
I just hooked up my Microkeyer 2 installed all software and the software is
communicating with the radio. However if I talk into my Mike there is no
transmit occurring via Vox or PTT on the radio.
Pi am using a Heil preset as received from Elecraft.
I have the k3 front mic cable.
I have
Pi am using a Heil preset as received from Elecraft. I have the k3
front mic cable. I have the wire marked line in on the cable to the
line in on the radio. Same for line out. I have set jumpers to non
electret. Can someone tell me what I am doing wrong.?
Elecraft ProSet has an ELECTRET mic yo
Hi,
Still no luck at all. The two jumpers are set as follows:
The jumper near the pots is set to EL (both posts covered).
The Jumper set at the left of the board is set to IC as per the manual
The RJ45 is plugged in the back. The Heil proset headphones are plugged in the
front headphone jack on
Follow the audio setup instructions in the microHAM Users Manual.
If you do not receive the expected results at a given step, find
out why right away as each step builds on the previous step.
When you are in voice modes the LINE LED on MK II should be OFF
(or blinking if recording to the DVK).
On Dec 27, 2013, at 10:00 AM, elecraft-requ...@mailman.qth.net wrote:
> Still no luck at all. The two jumpers are set as follows:
First, stick with it, once you get it working you will LOVE the mkII, its a
great in interface!
Joe has always given me excellent help with my issues.
I first used
5 matches
Mail list logo
