My K3 also arrived last Monday and they stated that mine had arrived and
that there were a few in the queue in front of it. When I called on
Friday they'd stated that mine was on the bench but hadn't gotten worked
on yet. They expect that it should ship out early this coming week. I
was told
]
To: Dave Hachadorian [EMAIL PROTECTED]; Elecraft
Reflector
elecraft@mailman.qth.net
Sent: Sunday, July 13, 2008 1:58 AM
Subject: Re: [Elecraft] K3 kit problem
I had the same experience with 1025 except that
when I
went back to the VCO CAL stage I got a error.
Attempts to cure
Just finished building K3 sn 1176. When I went to do the
reference oscillator calibration by zero-beating with WWV, I
found that the receiver is deaf. Even with a large antenna
connected, there is no increase in background noise, and no
signals can be heard.
When I turned the K3 off and then
According to the manual:
MISO line stuck low (asserted)
* De-install option modules one at a time.
If no failing option module can be found,
there may be a problem on the RF board.
Chad WE9V
On Sat, Jul 12, 2008 at 2:19 PM, Dave Hachadorian [EMAIL PROTECTED] wrote:
Just finished building K3 sn
I had the same experience with 1025 except that when I
went back to the VCO CAL stage I got a error.
Attempts to cure the problem working with Elecraft
were not successful and I returned the transceiver to
Elecraft. They have had it since last Monday and I
have not heard anything yet. I don't
5 matches
Mail list logo