Before I hassle elecraft support maybe someone on
the list can come up with something.
Just put together a new K3 and I can´t get any mic
connection to the FP connector, i e no modulation.
It works ok from the rear connector.
I checked Config / Main and don´t seem to find any
errors. Is there
When on MENU:MIC SEL , and with it set to FP.L or FP.H, tapping 2 should
toggle the bias on and off. 73, Guy.
On Fri, Nov 16, 2012 at 9:40 AM, Jan Erik Holm sm2...@bdtv.se wrote:
Before I hassle elecraft support maybe someone on
the list can come up with something.
Just put together a new
OK Guy,
Well if it works from the rear bias must be offor???
I have in CONFIG mic bnd off ( I think it was).
But will try this tapping 2
/Jim
---
On 2012-11-16 17:01, Guy Olinger K2AV wrote:
When on MENU:MIC SEL , and with it set to FP.L or FP.H, tapping 2
should toggle the bias
Jim,
The MIC SEL menu item is found in the main menu. The entry in the
CONFIG menu is MIC BTN which is for the :MIC BUTTONS - that is the up
and down buttons if they are present.
73,
Don W3FPR
On 11/16/2012 11:11 AM, Jan Erik Holm wrote:
OK Guy,
Well if it works from the rear bias must be
Yes MIC BTNunderstand, it´s off anyway.
MIC SELyes I know.
I was looking in all menus for the bias since I was
thinking that it was the culprit but didn´t find it.
However since it works from the rear panel connector
and not the FP connector can it still be the bias?
/Jim
---
On
You have not yet mentioned tapping 2 with MAIN:MIC SEL on to toggle the
bias. The bias for FP.x and the bias for rP.x are independent and set by
tapping 2 when you have either of them selected.
The bias on the front pin should toggle on and off with the menu display
going back and forth between
I recall that some posts ago, you said you have 5 volts on pin 1 of the
front mic jack. That fact alone says bias is set on for the front mic.
Go to the MAIN MENU : MIC SEL entry
Then select FP.x (x = H or L)
You will likely see bIAS in the display - Tap the 2 button to turn
it off.
Your
Sorry I didn´t. Yes I did do that and then bias turns on of course.
Thanks for the advice, I didn´t know about that command. I never
ever use bias with my microphones. In the first place I was
thinking maybe bias was on as default, this wasn´t the case with
my first K3. Indeed when tapping 2 BIAS
Jim,
Yes, I understand the language problem. Sorry that I cannot communicate
in your native tongue.
There is an independent bias setting for the each microphone jack.
Since your microphones do not require bias, make certain bias is set not
turned on (indicated by a blank in the MIC SEL menu)
9 matches
Mail list logo