I use serial cable only as well using RTS DTR for keying from N1mm and
logger 32. originally I had some issues with some messed up keying
using the USB- serial adapter. I discovered that the Mother board did
have RS232 it just wasn't on the back of the computer. I just needed
an adapter
---Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of aa...@aol.com
Sent: Saturday, December 01, 2012 1:16 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 rig control/CW serial interface
Is there an interface commercially availab
Will,
Sure. It's called a regular DE9 straight-through serial extension
cable. You probably already have one. The pins in the K3 RS232 port
that would normally be connected to the PC's RTS and DTR outputs can
be used for PTT and CW keying. Search the K3 owner's manual for
"ptt-key".
73,
~iai
Is there an interface commercially available that combines CW keying and K3 rig
control (from N1MM type software) into a single serial cable?
I think K1NU used to make these for Yaesu radios, but I'm not sure they are
available any more.
Thanks/73,
Will AA4NC
__
4 matches
Mail list logo