>> On Aug 21, 2015, at 3:12 PM, pastor...@verizon.net wrote:
>>
>> Vic, The Digi-Keyer II is connected to the computer via USB. And
>> then there is a cable connected between the Digi-Keyer II and the
>> P3. Then from the P3 to the K3.
You *CAN NOT* do a firmware upload via any microHAM "keyer
You should either get the usb to serial cable that you have working, get
another one, or use a real serial port if the computer has one. The computer
needs to be connected directly to the P3 with no intervening devices when you
load firmware.
Vic 4X6GP/K2VCO
> On Aug 21, 2015, at 3:12 PM, pas
There is a recovery procedure in K3 Utility Help. See Troubleshooting, MCU
Load.
73 de Dick, K6KR
> On Aug 21, 2015, at 00:37, pastor...@verizon.net wrote:
>
> I am sending this message again, as it seems my first message never made it
> to the board. I was trying to load the new Firmware
There's a procedure described in the K3 Utility Help menu under
'troubleshooting' called Forcing the K3 into "Firmware Load Required"
Mode. Follow this procedure.
73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/
On 21 Aug 2015 10:37, pastor...@verizon.net wrote:
I am sending th
I am sending this message again, as it seems my first message never made it to
the board. I was trying to load the new Firmware into my K3. Well for some
reason we had a power blip during a storm and now my K3 is stuck in MCU LD.
Right now the screen in dark when power is applied and MCU LD is o
gt; -Original Message-
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net]on Behalf Of W6IZT
> Sent: Saturday, March 07, 2009 9:49 PM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] K3 stuck in MCU LD
>
> My k3 started to act up tonig
@mailman.qth.net
Subject: [Elecraft] K3 stuck in MCU LD
My k3 started to act up tonight. It was not putting out any power in CW, and
was behaving as if it was in QSK mode even though it was in semi-breaking
mode. The power output was OK in SSB. I tried to reload the FW and now it is
stuck in MCU LD mode
My k3 started to act up tonight. It was not putting out any power in CW, and
was behaving as if it was in QSK mode even though it was in semi-breaking
mode. The power output was OK in SSB. I tried to reload the FW and now it is
stuck in MCU LD mode and the background light on the display is not lit
8 matches
Mail list logo