Be sure to call first to let them know you are coming. Otherwise they may not
have the right people to help you.
Don is now of our excellent support guys. I would be greatly surprised if he
couldn’t help more quickly.
One other tip - it is far easier (and better) to use the K3 Utility to
Sorry for the bother Don,
I'm 2 hours from Elecraft. I should be able to walk in my radio for repair. Ted
In a message dated 03/05/17 20:44:55 Pacific Standard Time,
ml-node+s365791n7627646...@n2.nabble.com writes:
Is that "TX Test" instead of "text test"?
You should not put the K3S into TX
Is that "TX Test" instead of "text test"?
You should not put the K3S into TX TEST mode when doing the TX Gain
Calibration. TX TEST is a condition where everything in transmit works
*except* there is no RF output. TX TEST is set ON/OFF by holding the
right side of the MODE button.
Use the
Ted,
A little more information please.
What band(s) fail?
Do you have a good 50 ohm dummy load attached?
Is the dummy load a good one for up to 54MHz?
Often the TX Gain Calibration will fail when operated from K3Utility,
but will pass if done manually on each band. See the K3S manual page 52.
TX Gain Calibration requires that your k3 be in "TX NORM" for Calibration.
5 Watt Calibration failed.
Help. How do I fix this? Ted. wp...@aol.com 209.601.5354. Ted
--
View this message in context:
5 matches
Mail list logo