Pete,
I'm using a CM500 that is a year or so old. It replaced one that finally
fell apart and I was tired of gluing it back together.
When I replaced the headset, I did not need to make any adjustments!
I went from a K3 to a K4 with the Yamaha headset plugged into the rear
connectors.
My Mic gain
My CM-500 is about 4 years old, and shedding ear-pads, but it works fine
with my K3.
73, Pete N4ZR
On 7/31/2023 6:52 AM, Alan Bloom wrote:
I had never used my CM-500 on a K3 so I can't do that comparison. But
on the K4 I had to turn on the internal mic preamp and set the mic
gain all the way
I had never used my CM-500 on a K3 so I can't do that comparison. But on
the K4 I had to turn on the internal mic preamp and set the mic gain all
the way to maximum. That seemed to give about the correct level - I
could talk at normal loudness to get 5 on the ALC.
I also use the CM-500 on my
On 7/30/2023 4:40 PM, Oscar Staudt wrote:
I attempted to get 3-5 bars of ALC by turning up the mic gain control. Even
with the gain up to 80, I’d have to speak*very* loudly to just get a
flicker on the ALC meter.
Do the headphones work? Are you sure that the mic is plugged all the
way into
Actually, I had (have) this very same problem and brought it up on here quite
some time ago. CM-500, mic and phones plugged into proper jacks on rear,
preamp on, bias on, mic gain at max, mic right at my lips, and I still have to
talk very loudly to get any response out of the ALC meter. I
On 7/30/2023 7:40 PM, Oscar Staudt wrote:
When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic and
headphones from my K3, and plugged them into the back of my K4. I set the
mic input to rear, and mic bias on. I expected the mic to perform
like it had in the K3.
I attempted to get
This may sound like a silly question, but are you sure you have the plugs in
the right way round? i.e. Not swapped over.
AFAIK this problem has not been reported on the K4 reflector and I know other
folks are using them.
73,
Alan - G4GNX
South Coast UK
Elecraft K4D / KPA500 / KAT500 / IC-9700
When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic and
headphones from my K3, and plugged them into the back of my K4. I set the
mic input to rear, and mic bias on. I expected the mic to perform
like it had in the K3.
I attempted to get 3-5 bars of ALC by turning up the mic gain
8 matches
Mail list logo