Hello,
I'm confused on the construction of J8. First the manual states there are
12 mini crimp pins including 2 spares. J8 has ten pins but I only have 4
wires that come the Control board minus the bare lead. So am I inserting
the crimp pins with the wires in one side of J8 and inserting empty
The instructions tell you to insert all of the pins so the connector
will be more difficult to remove (so it will not fall off by itself). I
do not consider that a problem, if you put in only the 4 pins which have
wires attached, the force required to insert the connector (and remove
it) is
Don,
I understand now, thanks.
Ed
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KAT2-J8-tp788p871.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
Phil,
Yes, it is a tight fit with those many pins, but it will go on, and it
will come off too. Make certain all the pins are started before
applying pressure and apply pressure from both ends of the board.
To remove it, 'wiggle' the ends of the boards alternately so it is
removed straight.
Yes, I have the same experience in my latest KAT2 as well.
Johnny Siu VR2XMC
--- 2009年1月23日 星期五,Phillip Heller phel...@me.com 寫道﹕
寄件人: Phillip Heller phel...@me.com
主題: [Elecraft] KAT2 J8 tolerance?
收件人: elecraft@mailman.qth.net
日期: 2009 1 23 星期五 下午 2:07
Just finished the KAT2 for K2 #6662
Just finished the KAT2 for K2 #6662.
Unfortunately, J8 is just too tight on CTRL P4. I *might* be able to
force it on, but it would never come off.
Anyone run into this?
--phil
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be
6 matches
Mail list logo