Wayne published something a while back that if you push the "tune"
button very quickly after the first tuning stops, it will try again with
another algorithm that might result in a lower tuned SWR. This from the
release notes for firmware 1.75.
" * ATU MATCHING Improved: If you tap ATU TUNE a
Hello Rick!
The reference should be to the K3, not the KXV3. Recent firmware
provides the "ALT" tune you are looking for.
Tap ATU TUNE a second time within 5 seconds on the same band/antenna and
a more extensive search algorithm will be used.
73,
Lyle KK7P
___
I have just installed the KAT3 and it seems to be working, however, i
can only get a SWR of 4.0 on the K3 on my 40M end fed antenna. I know
the SWR with this antenna is very high, but I can get the SWR down to
2.5 with my K2 ATU. The K2 is using ALT tune to get there taking a
long time.
I know it won't match 10:1 loads on 6M, as it was described previously as
"limited" on this band. I'd like to know what SWR load range the tuner CAN
match on 6M. 3:1 would be useful...
Bill / W5WVO
Lou Roux wrote:
Will the KAT3 have similar specs as the KAT100, specifically will it
match 10:
Will the KAT3 have similar specs as the KAT100, specifically will it
match 10:1 SWR loads?
Thanks,
Lou - W6UR
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
5 matches
Mail list logo