[Elecraft] KAT500 Locked on Ant 1

2021-04-30 Thread Andy Durbin
It may not be related to your problem but there is a documented issue with enabled antennas not being selectable in BPY mode. Elecraft is aware of this issue. Because of this problem I never use BYP mode. I use BYP state in MAN mode which is electrically equivalent. Andy, k3wyc

Re: [Elecraft] KAT500 Locked on Ant 1

2021-04-30 Thread richard gilley
Hi, Thank you Dick K6KR, and Skip NC90 for your help. I ended up doing a factory default, enabled the ant per band and all is well. One question: After setting the configuration, saving, shutting down, and powering up I found in checking "edit configuration" ant 1 and 3 were no

Re: [Elecraft] KAT500 Locked on Ant 1

2021-04-29 Thread Dick Dievendorff
On Behalf Of richard gilley Sent: Thursday, April 29, 2021 17:23 To: George Pasek via Elecraft Subject: [Elecraft] KAT500 Locked on Ant 1 Looking for thoughts on my KAT500 that remains locked on Ant 1, cannot change to ant 2, manually or via the Elecraft utility regardless of the mode setting, Set con

[Elecraft] KAT500 Locked on Ant 1

2021-04-29 Thread richard gilley
Looking for thoughts on my KAT500 that remains locked on Ant 1, cannot change to ant 2, manually or via the Elecraft utility regardless of the mode setting, Set configuration to a later set up still no joy. And of course does not tune, no relay actions, no caps set or inductors shown in