Sorry, guys. Everything is gone and went very fast. Wish I had more.
73,
Mike, W4UM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I have not looked at the K1 order page in a while , Is the 4 band board no
longer available or did I overlook it?
Thanks Glenn
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Glenn,
You are correct, it is not currently listed. I have a suspicion it is
because the blue trimmer capacitors used on the 4 band board are no
longer available.
I recently assembled a KXB3080 option for a KX1 which used to use the
same capacitors and noticed that the trimmers had been
While doing a mod through shear carelessness I put a short on the front
panel board .When I returned power to the K1 it functioned perfectly
except that it will not now read the battery voltage (reads 0 volts).
I have checked the potential devider R6 /R7 and 6 volts is supplied to
pin3 (RA1) of
Yves wrote:
What do you use as a portable antenna with the K1?
I *always* use a simple, cheap, resonant, wire dipole. More than 30 years
of playing with portable antennas, often in side by side comparisons with
vertical antennas, has shown me that even high-dollar verticals without very
good
:[EMAIL PROTECTED] On Behalf Of Yves Dussault
Sent: September 21, 2004 3:05 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Ki and MP-1 antenna
Hi friends!
Any of you using the K1 with an MP-1 antenna?
I do not hear much with this antenna!
Sometimes just nothing
What do you use as a portable
Hi friends!
Any of you using the K1 with an MP-1 antenna?
I do not hear much with this antenna!
Sometimes just nothing
What do you use as a portable antenna with the K1?
Yves Dussault-VE2ATD
Laval, QC, Canada
___
Elecraft mailing list
Post to:
Yves Dussault wrote:
Hi friends!
What do you use as a portable antenna with the K1?
Yves,
I use either a homebrewed Buddipole:
http://www.qsl.net/w3ff
or a homebrews PAC-12
http://www.njqrp.org/pac-12/index.html
I like both.
73 de Larry W2LJ
On Tue, Sep 21, 2004 at 04:05:27PM -0400, Yves Dussault wrote:
Hi friends!
Any of you using the K1 with an MP-1 antenna?
I do not hear much with this antenna!
Sometimes just nothing
What do you use as a portable antenna with the K1?
I used an MP-1 with my K2 in the WPX contest from a
Hey Wayne and Eric, how about a K1 design using the DDS of the KX1, full
coverage and the options of the K1
Steve KA4NRF(1)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
10 matches
Mail list logo