Fraser,
What is the power level at 'full power'? I have seen K2/100s that could
easily develop 160 watts on 160. To be consistent, measure the current
drawn from the power supply while the KPA100 is delivering 100 watts to a 50
ohm dummy load. All other comparisons are filled with unknown varia
Hi, our clubs K2/100 has the same problem with high curent at full power on
160m, but my own is ok. Has anyone found a cure?
73 Fraser G4BJM
From: John Reiser <[EMAIL PROTECTED]>
To: J F <[EMAIL PROTECTED]>,Elecraft Discussion List
Subject: Re: [Elecraft] KPA100/KAT100 on 160
lecraft Discussion List"
Sent: Thursday, December 07, 2006 2:38 PM
Subject: RE: [Elecraft] KPA100/KAT100 on 160 Hi Current
Fellas:
For what it's probably worth, I just checked my K2/100 on 160M into a
known good B&W 50-Ohm dummyload/wattmeter.
At 14.2VDC supply (out of the P/
Thanks Tom!
I checked my second K2/100 on 160 into a dummy load
and it looks like it draws about 18A at 12.5 VDC.
So I'm guessing I miscounted turns. Will check it out
over the weekend, assuming 10 isn't hopping.
Cheers,
Julius
n2wn
--- Tom Hammond <[EMAIL PROTECTED]> wrote:
> Fellas:
>
> For
scussion List"
Sent: Thursday, December 07, 2006 2:38 PM
Subject: RE: [Elecraft] KPA100/KAT100 on 160 Hi Current
Fellas:
For what it's probably worth, I just checked my K2/100 on 160M into a
known good B&W 50-Ohm dummyload/wattmeter.
At 14.2VDC supply (out of the P/S) my KPA1
Fellas:
For what it's probably worth, I just checked my K2/100 on 160M into a
known good B&W 50-Ohm dummyload/wattmeter.
At 14.2VDC supply (out of the P/S) my KPA100 draws 16A of current at
a measured 100W into the dummyload.
Just to muck up the discussion a bit more.
73,
Tom N0SS
Prev
>
To: "John Reiser" <[EMAIL PROTECTED]>; "J F" <[EMAIL PROTECTED]>;
"Elecraft Discussion List"
Sent: Thursday, December 07, 2006 1:25 PM
Subject: RE: [Elecraft] KPA100/KAT100 on 160 Hi Current
John, Julius,
The normal thing to look at in a high cu
gt; > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] Behalf
> Of John Reiser
> > Sent: Thursday, December 07, 2006 10:43 AM
> > To: J F; Elecraft Discussion List
> > Subject: Re: [Elecraft] KPA100/KAT100 on 160 Hi
> Current
> >
> >
> > Hi Julius
f Of John Reiser
> Sent: Thursday, December 07, 2006 10:43 AM
> To: J F; Elecraft Discussion List
> Subject: Re: [Elecraft] KPA100/KAT100 on 160 Hi Current
>
>
> Hi Julius,
>
> Both my K2/100s, #4970 and #5570 exhibit excessive current draw on 160
> meters, as indicated by the
come up with the definitive
solution. But so far there
hasn't been any.
Good luck and 73,
John, W2GW
- Original Message -
From: "J F" <[EMAIL PROTECTED]>
To: "Elecraft Discussion List"
Sent: Wednesday, December 06, 2006 5:49 AM
Subject: [Elecraft] KPA10
sion for a data point.
Craig
NZ0R
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John Reiser
Sent: Thursday, December 07, 2006 9:43 AM
To: J F; Elecraft Discussion List
Subject: Re: [Elecraft] KPA100/KAT100 on 160 Hi Current
Hi Julius,
Both my K2/100s,
> When I saw your post, I became hopeful that it might
> evoke a response from
> someone who had come up with the definitive
> solution. But so far there
> hasn't been any.
>
> Good luck and 73,
>
> John, W2GW
>
> ----- Original Message -----
> From: &qu
To: "Elecraft Discussion List"
Sent: Wednesday, December 06, 2006 5:49 AM
Subject: [Elecraft] KPA100/KAT100 on 160 Hi Current
Well ARRL 160 is history now.
As usual, with the K2 I heard more than I could get to
hear me ;o) Evidently I heard and worked more than
some of the local cont
Well ARRL 160 is history now.
As usual, with the K2 I heard more than I could get to
hear me ;o) Evidently I heard and worked more than
some of the local contesters with "other" brand
equipment heheh.
Anyway I have a problem... I use the KPA100 with the
KAT100, and there may be no connection betw
14 matches
Mail list logo