--- Original Message -
From: "Don Wilhelm" <[EMAIL PROTECTED]>
To: "Brian Murrey" <[EMAIL PROTECTED]>;
Sent: Wednesday, June 21, 2006 7:37 AM
Subject: RE: [Elecraft] KX1 Issue
> Brian,
>
> If you have relays clicking and it attempts to tune, then the firm
Brian,
If you have relays clicking and it attempts to tune, then the firmware chip
is likely just fine.
You said it failed after a storm, which gives me cause to believe that the
two diodes in the wattmeter should be replaced. Put new 1N5711s in the D1
and D2 positions and I would believe the pro
r internal
network settings since the name change, so I wonder if that has anything to do
with it.
73
- Original Message -
From: "Alexandra Carter" <[EMAIL PROTECTED]>
To: "Brian Murrey" <[EMAIL PROTECTED]>
Cc:
Sent: Wednesday, June 21, 2006 12:44 AM
Subject
Brian,
I also notice that when I transmit now, I only get one LED at the far left of
the display to pop on...it used to show three or four...external meter shows
3w usually.
This is normal behaviour for a KX1 without the antenna tuner. Only with the
KXAT1 in place it displays power output with
If it won't tune to a dummy load then something is really wrong. 73
de Alex NS.Y.
On Jun 20, 2006, at 6:24 AM, Brian Murrey wrote:
Any experts on KXAT1 debugging?
Yesterday I had the KX1 in the car with the 20m hamstick and for
about half
the
day I was about to work Florida, Mass, Texas..
Any experts on KXAT1 debugging?
Yesterday I had the KX1 in the car with the 20m hamstick and for about half
the
day I was about to work Florida, Mass, Texas...with 2w and the KX1. I was
using the KXAT1 to tune my hamstick, even though I have the hamstick adjusted
to 1.2 : 1 without the tuner.
BI
6 matches
Mail list logo