Wait until you have the KXB3080 option installed and tested. Then check
with a 12 volt power supply to see if you have 3 watts output on all bands.
If less than 3 watts, install the power mod.
Do not install the power mod if you have at least 3 watts output on all
bands, it may overstress the out
Hello all. I received KX1 SN 1721 several days ago. As of this evening, I
have successfully completed Part 1 - both assembly and testing! I'm having a
lot of fun with it, and looking forward to many fruitful hours of operation.
Anyway, my question: I am building the 80/30 module to install f
Folks,
Up until today I had beilived that the KX1 power mod was needed for the
KBX3080 install and desirable for others.
NOT SO! I now have Wayne's input on the subject, and find that it is to be
used ONLY if your KX1 actually does have low power output.
If you can develop at least 3 watts on a
Here's the link to the KX1 Power Mod on the Elecraft website. I
searched for it also and couldn't find it. So I tried a Google
search, and there it was - very well hidden. Don't know why it isn't
easier to find along with the other Elecraft mods.
http://www.elecraft.com/manual/E740099%20KX1%20
Sorry Joe I meant to send this to the reflector
There is no direct link to the Mods Page that I could find, however;
For the benefit of the Elecraft Reflector Archive and any others that are
looking for the KX1 Power Mod; you can find it by going to the Builders
Resources page, on the top of
Joe,
The 'KX1 power mod' is available from Elecraft as PN E850230. I could not
find it on the website, and I really don't know why.
The change is quite easy - just 2 resistors to change. R30 increases to 33
ohms (from 22) and R11 is decreased to 4.7 ohms (from 10). If you have the
1/4 watt res
I've recently seen reference to a KX1 power modwhere can I find this mod
and what version of the KX1 is it used on??
I checked the Elecraft site but didn't find it...did I miss something on the
site??
73, Joe W2KJ
K1, KX1, K2, I QRP, t
7 matches
Mail list logo