Stan,
Yes, check the DC Power thru the coax. If you see a significant voltage
drop, the first thing to look for is a bad shield connection between the
shield and connectors.
Right now, you have too many variables in the 'equation' - follow the
steps below to find out what is working and
Aaron, my SWR is being reported by the KX2 as below 1.2:1 at all times;
usually 1:1. I'm using a window line fed doublet through an SGC-231
autocoupler. This situation occurs on all HF bands.
I do not have either the KX2 internal ATU nor do I have the KXPA100 ATU.
Now you've got me
Hi Stan,
This sounds like the amp is folding back it's power. I encountered
something similar on my KX3/KXPA100 when I had an issue with my antenna and
was experiencing excessive SWR. Check the SWR indicators (both devices).
73,
Aaron KK6ZDB
On Tue, Sep 19, 2017, 20:12 stan levandowski
Since I'm basically a QRP op and rarely use more than 25 watts, I guess
I didn't notice when this "problem" actually began. So here's the issue:
My KX2 will show the power I've set with the knob precisely, right up to
110 watts. However, my KXPA100's green LEDs seem to be about 20 watts
4 matches
Mail list logo
