Jim -
I'm not sure this will help but here goes
I have KX2 SN 11xx with current firmware loaded: uC 2.89, DSP 1.52.
I've reviewed all the update information and there doesn't appear to be
any changes that would modify the behavior of the DISP function. Mine
works as described on page 2
I have owned my KX2 for some time now. I am now just now getting it on the
air. I have a problem that I can not resolve. I have spent a few hours
attempting to do that.
When I try to bring up the DISPLAY function it does not work. The same
button when held does work. Just the DISPLAY does not resp
Thank you.was bugging me. It's not on page 8 of my manual but on page
29. When you referred to CW/Text decode I remembered.
Tex
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX2-Display-Question-tp7626506p7626509.html
Sent from the Elecraft mailing list archive
Manual page 8, in the box titled “Mode Icons”. It means that in FM mode a Tone
is set, or that CW/Text decode is turned on.
> On Feb 6, 2017, at 5:04 PM, pkhjr via Elecraft
> wrote:
>
> I have acquired a used KX2 and have a question about the display information.
> When in CW mode a lone
>
I have acquired a used KX2 and have a question about the display information.
When in CW mode a lone
'T' is in the lower right hand corner of the display. I've looked through
the manual and don't find anything. Page 13 shows the 'T' but I couldn't
find any reference to what is means?
Thanks
Tex
.net wrote:
Message: 4
Date: Wed, 1 Feb 2017 13:41:20 +
From: Stephen Prior
To: Elecraft
Subject: [Elecraft] KX2 display on start-up
Message-ID:
Content-Type: text/plain; charset=UTF-8
Just received my KX2 and I'm very pleased with it, although fitting
the ATU
was a challenge, even after
fter a
> couple of seconds I've got use to it. Anyone have ideas on the cause?
>
> 73's Gary K6YOA
>
>
> On 2/1/2017 4:25 PM, elecraft-requ...@mailman.qth.net wrote:
>
>> Message: 4
>> Date: Wed, 1 Feb 2017 13:41:20 +
>> From: Stephen Prior
>>
n Prior
To: Elecraft
Subject: [Elecraft] KX2 display on start-up
Message-ID:
Content-Type: text/plain; charset=UTF-8
Just received my KX2 and I'm very pleased with it, although fitting the ATU
was a challenge, even after having read the updated information on it!
Anyway, I believe
Hi Stephen,
This is completely normal. Sometimes the segments will be randomized, sometimes
not. We initialize the LCD after doing a checksum and power-up status checks.
If you watch carefully you may discover meaningful patterns in the seemingly
scrambled segments. This can be a therapeutic f
Just received my KX2 and I'm very pleased with it, although fitting the ATU
was a challenge, even after having read the updated information on it!
Anyway, I believe all is well but there is something that I don't
understand. If the KX2 has been off for a while, when I turn it on I get
some random
10 matches
Mail list logo