Re: [Elecraft] KX3 S/N 2294 doen't start

2012-11-04 Thread Matt Zilmer
Yes. What Jim said too. matt On Sun, 04 Nov 2012 08:38:12 -0500, you wrote: >Make sure as well that the flex cable is plugged in correctly. I suggest >reviewing the section of the manual. > >73 > >Jim WB8AZP > >Sent from my iPhone > >On Nov 4, 2012, at 8:15 AM, Matt Zilmer wrote: > >> Try re

Re: [Elecraft] KX3 S/N 2294 doen't start

2012-11-04 Thread James kvochick
Make sure as well that the flex cable is plugged in correctly. I suggest reviewing the section of the manual. 73 Jim WB8AZP Sent from my iPhone On Nov 4, 2012, at 8:15 AM, Matt Zilmer wrote: > Try re-seating the flex cable between RF and FP boards. > > matt W6NIA > > On Sat, 03 Nov 2012 2

Re: [Elecraft] KX3 S/N 2294 doen't start

2012-11-04 Thread Matt Zilmer
Try re-seating the flex cable between RF and FP boards. matt W6NIA On Sat, 03 Nov 2012 21:03:34 +0100, you wrote: >Hi, just assembled the Kit S/N 2294 with KXAT3 and KXFL3. No problems >during assembly. I used anti static wristband and mat. > >Tried 12V battery and linear power supply. While pr

Re: [Elecraft] KX3 S/N 2294 doen't start

2012-11-04 Thread Holger Doerschel
Hello, this morning I tried the KXUSB and the KX3 utility. No way. So I will send my KX3 to the german service office in Berlin. And I do not use the internal batteries. I assembled the batterie holders but in the future I will definately not use them. So I also didn't bought the KXBC3 option.

Re: [Elecraft] KX3 S/N 2294 doen't start

2012-11-03 Thread Holger Doerschel
Dear Larry, I separated the top and bottom cover. No change. I removed the connections. No change except now the relay clicking of the KXAT3 doesn't occur. regards Holger - DL9HDA Am 03.11.2012 23:15, schrieb Larry Phillips K4PIC: > Hello Holger. I had the exact same problem that you descr

Re: [Elecraft] KX3 S/N 2294 doen't start

2012-11-03 Thread Holger Doerschel
... display backlight turns on and I can hear some relay-clicking. regards Holger - DL9HDA Am 03.11.2012 21:03, schrieb Holger Doerschel: > Hi, just assembled the Kit S/N 2294 with KXAT3 and KXFL3. No problems > during assembly. I used anti static wristband and mat. > > Tried 12V battery and

[Elecraft] KX3 S/N 2294 doen't start

2012-11-03 Thread Holger Doerschel
Hi, just assembled the Kit S/N 2294 with KXAT3 and KXFL3. No problems during assembly. I used anti static wristband and mat. Tried 12V battery and linear power supply. While pressing BAND- and ATU TUNE the four LED light up. After releasing the buttons the LEDs switch off and the display backli