On 13/03/17 02:55, Jeff Hughes wrote:
> Thanks, gentlemen.
>
> Well, the good news is I got my KX3 updated with the latest MCU and DSP
> firmware. In the ~10 minutes or so it took me to compose my message
> yesterday, the (different) computer I had connected to the radio just sat
> there. I
Jeff,
Dropping the baud rate is not likely to solve the problem.
For the firmware download, KX3 Utility sets the KX3 baud rate to 38400
automatically.
I suspect you had a driver issue in your computer that was corrected by
the update.
73,
Don W3FPR
On 3/12/2017 4:41 PM, Jeff Hughes wrote:
Jeff, if it's brand new, then I wouldn't fret about the baud rate. I
bought a used station (KX3/PX3/KXPA100) and discovered that the
communication baud rate with the amp in the station was 9600; and the baud
rate standalone was 38400. It took a couple macro commands from the
helpful folks here
Thanks, gentlemen.
Well, the good news is I got my KX3 updated with the latest MCU and DSP
firmware. In the ~10 minutes or so it took me to compose my message yesterday,
the (different) computer I had connected to the radio just sat there. I guess
it needed the rest… after sending off my
Exactly
Sent from my iPhone
> On Mar 12, 2017, at 1:50 PM, Phil Hystad wrote:
>
> That would only be true of MacLoggerDX were connected to the KX3.
>
>
>> On Mar 11, 2017, at 3:29 PM, John Strandberg wrote:
>>
>> Jeff,
>>
>> Make sure you have quit
That would only be true of MacLoggerDX were connected to the KX3.
> On Mar 11, 2017, at 3:29 PM, John Strandberg wrote:
>
> Jeff,
>
> Make sure you have quit MacLoggerDX when using the KX3 Utility. If it is
> active, it will cause a communications conflict with the KX3
Jeff,
Make sure you have quit MacLoggerDX when using the KX3 Utility. If it is
active, it will cause a communications conflict with the KX3 Utility. Hope
this helps.
73 John W4DX
Sent from my iPad
> On Mar 11, 2017, at 5:22 PM, Jeff Hughes wrote:
>
> New KX3
You're a new KX3 owner. Are you the owner of a new KX3?Try dropping the
baud rate.
On Sat, Mar 11, 2017 at 5:22 PM, Jeff Hughes
wrote:
> New KX3 owner here (crazy nice radio and I’m utterly smitten!).
>
> Have just downloaded the KX3 Utility program and can’t
New KX3 owner here (crazy nice radio and I’m utterly smitten!).
Have just downloaded the KX3 Utility program and can’t get it to work. It
consistently refuses to talk to the radio. “KX3 is not responding” is what I
get.
I’m (mostly) on a Mac. I’ve downloaded and installed the correct
9 matches
Mail list logo