On Wed,12/30/2015 4:31 PM, Jim Kutsch, KY2D wrote:
The mic with the problem is an Electrovoice RE15 on a boom with its XLR
connection going into a HOSA splitter cable, TRS on the KX3 side and two XLR
connectors on the other.
I suspect it's a wiring problem. The RE15 is a dynamic pro mic and i
Also splitting audio at mike levels can be a real problem as one "split"
can appear as an input to the other side. Mikes should be connected
direct to one radio only.
As Don stated, PL-259 connectors need to be more than finger tight. I've
found many good looking PL-259 connectors which are
Where did you add the common mode choke? What is the choking impedance
of that common mode choke? Take a look at the writings of Jim Brown
K9YC for effective common mode chokes.
The fact that you do not have the problem with the MH3 microphone
strongly suggests that there is not a problem wi
I'm running a KX3 and KXPA100 here. Both are very early units but with the
latest firmware. All is fine with the Elecraft hand mic but I want to use a
boom mic and foot switch. However, I'm having problems with two different
mics. In both cases, when power is set to more than 50W, the audio is
dis
4 matches
Mail list logo