This was fixed in KX3 MCU rev. 2.28. I'll send you the latest (2.33).
73,
Wayne
N6KR
On Jan 16, 2015, at 10:59 AM, Irwin Darack wrote:
> I recently checked and upgraded all of the Firmware with my KX3 (MCU =
> 2.27, & DSP = 1.3), KXPA (1.32) and PX3 (1.16) that was older.
>
> I found that it
Make sure the power to the KXPA100 is good. I had a PP connector contact
move causing a poor connection to the KXPA100. The KX3 kept returning to PA
off. Fixed the connector and all was well.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KXPA100-Loosing-Communicatio
Just a thought…
Not using a KXPA but do use my radio remotely..
I run my remote control radio with HRD for the past 5 years.. I run the radio
at 4800 with the thought that any issues might not affect the communications
path to the radio from the computer. Never… had a drop-out.
Frank KG9H
O
Are you using a rig controller? In my experience, depending on how
'chatty' your rig controller is,
it can interfere with the KX3/KXPA100 init routine. It is certainly the
case with mine (wizkers.io), since it
not only talks to the KX3 but also the KXPA100, every second.
Ed, W6ELA
On Fri, Jan 1
I recently checked and upgraded all of the Firmware with my KX3 (MCU =
2.27, & DSP = 1.3), KXPA (1.32) and PX3 (1.16) that was older.
I found that it lost communications from the KX3 to the KXPA100. Hence it
results in turning PA Mode Off. Even when I go back into the Menu settings,
turn PA Mode
5 matches
Mail list logo