'Good! I never could play the violin before.'
73
Fred, AE6QL
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Pierre
Sent: Friday, August 03, 2012 6:31 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] LiFeP
This batter seems to have a PCB that prevents overcharging so you may be good
with any charger.
A good lead acid battery charger should have a cutoff at about 14.5 V,
which is good for 12.8V LiFePO4 battery. I found that some chargers actually
produce up to 18V but perhaps at a very low current.
A question: I have an automatic sealed battery charger for my 12V Pb-Ac
battery.
From:
http://www.ctcbattery.com/LiFePO4-Rechargeable-Battery/CTC-12-8V-4-5Ah-57-6Wh-Lithium-Iron-Phosphate-LiFePO4-Rechargeable-Battery
I read "Require no change to a lead acid battery charging system"
Does it means
I recently purchased a 4 cell LiFePO4 12.8v 4.5ah battery. I fully charged
the battery to 14.4v and then hooked it up to my KX3. Total hours of run
time = 21.4 hrs. Settings = backlight off, high power and all the other
settings in normal positions. I transmitted in ssb for what would be a
nor
According to the product descriptions, both of these battery packs have a
balancing board built into them. The documentation for the board shows that
the board has independent connections to each cell. It protects each cell
from over charge, over discharge, high current discharge, and short
circuit
On 7/6/2012 7:06 PM, Steve Jackson wrote:
> So, what is the opinion of the learned and experienced regarding these
> battery packs?
Well, there's the obvious ... 600mAh vs 3,000mAh of course. The LiFePO4
batteries have a very good capacity to weight ratio, and they are safe,
you can carry or p
Steve,
Temperature today was only 96 here in Wake Forest today, and the nasty
Thunderstorm mid-afternoon cooled it off some. Sounds like you might
want to move a bit East to the other edge of the Triangle area.
My answer depends on how you are going to use them - If you are going to
put them
Greetings to all from the Old North State ... which doesn't feel all that
'north' lately. 100F + every day.
There's a good contingent of portable-power aficionados here, and likely to
be even more ... with the new radio shipping in volume.
So, what is the opinion of the learned and experienced
John, I have a K2/10 and I am using this LiFePo4 battery installed inside
the radio.
http://www.batteryspace.com/lifepo426650battery128v3300mah42wh7aratewpcb.aspx
http://www.batteryspace.com/smartcharger15afor128vlifepo4batterypack4cells152vcut-offwith55mmx21mmmalebarrelplug.aspx
I contacted th
John,
There are lots and lots and lots of web sites to buy both the batteries
and chargers. I normally buy my Hyperion batteries from allerc.com I
use them for my r/c planes. I use lipo's for my electric motors
(generating 2000 to 6000 watts depending on how big the plane is).
Anyways check
No.
100 amp HB power supply plus West Mountain Radio ISOPower.
Battery brand unknown. Three commercial server room backup batteries.
Larger than a car battery.
The ISOPower trickle charges the batteries. When mains power fails the ISOPower
switches the power to the batteries which can sustain
Has anyone used a LiFePo4 battery to run Elecraft transceivers? What
charging techniques do you use? What battery brand and or size do you use?
Your thoughts?
Thanks
John Lally
W7JJL
__
Elecraft mailing list
Home: http://mailma
12 matches
Mail list logo