want to spend about $100 for a new Heil boom.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Friday, June 07, 2013 2:24 PM
To: g...@ka1j.com
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Microphone
...@ka1j.com
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Microphone for the K3 questions
I have the QC2 Bose headset, the Yamaha CM500 everyone recommends and the
MH2. I work mostly SSB.
I am happy with either the Bose or Yamaha with the K3. The Yamaha works just
fine. You don't need noise
LIke you, I operate very little SSB. I use the MH2 with fine results (when I
can find it). I set TX EQ to cut some of the lows and add to the highs for
punch.
Barry W2UP
--
View this message in context:
I use a K3 and rarely work SSB and I'm 99+% CW. I normally use a set
of Bose QC15 headsets and have a very old Heil HC-4 Mic element in an
older HM-5 Ball tip desk mic.
I've been consistently getting poor reports with SSB but listening to
the K3 monitor I'm not hearing anything unexpected. The
First, and most important: Using the TX Equalizer can tame any mic. You
can emphasize highs, lows, or a combination to produce armchair copy audio.
I use the MH2 and I get excellent reports. It is used for armchair copy
type operations - rag chew, nets, gas bagging, etc. However, I must
On Fri, 2013-06-07 at 16:25 -0400, Gary Smith wrote:
I use a K3 and rarely work SSB and I'm 99+% CW. I normally use a set
of Bose QC15 headsets and have a very old Heil HC-4 Mic element in an
older HM-5 Ball tip desk mic.
If you operate 99% CW, like I do, why worry about it? I bought two
Gary,
It's possible that the HC-4 has gotten rough over the years -
I had an HC5 element in the Heil ProSet give up after about
30 years G.
If you want a headset, I'd strongly recommend the Yamaha CM-500
( $50 on-line at places like BH Photovideo, Sam Ash, etc.) it
is not noise cancelling but
Gary,
Both those microphones should work well with the K3. Couple that with
the fact that you hear things OK in the monitor.
That suggests that there is something else wrong with your K3. I would
first check the filter selection for transmit using K3 Utility and make
certain the actual 2.7
Joe,
Have you been a ham that long?
73
Jim WB8AZP
Sent from my iPhone
On Jun 7, 2013, at 4:13 PM, Joe Subich, W4TV li...@subich.com wrote:
Gary,
It's possible that the HC-4 has gotten rough over the years -
I had an HC5 element in the Heil ProSet give up after about
30 years G.
Why? A good question. At this time I don't work SSB, have little
interest in a mode I need an interpreter to understand or send. When
as I have now, people I don't know telling me my audio sounds bad, I
need to fix this. Perhaps a $4 mic would be fine. I did try a
Genius headset and found it
On 6/7/2013 2:13 PM, Joe Subich, W4TV wrote:
If you want a headset, I'd strongly recommend the Yamaha CM-500
( $50 on-line at places like BH Photovideo, Sam Ash, etc.) it
is not noise cancelling but it beats the Heil hands down for
less than half the price.
Strongly agree. The CM500 headset
11 matches
Mail list logo