Elecraft Reflector participants:
If any of y’all use the N8LP tuning relay w/ your K3 and KPA500, I appreciate
your help.
My kit went together smoothly and all ohm meter checks A-OK. When I plug the
relay into the SteppIR control box the green light comes on.
I have RCA phono plug cable running f
Cary,
I think it will work as you want if you use the small interrupter between
the end of the cable from the K3 where it attaches to the KPA500.
73, Jim N7US
-Original Message-
Elecraft Reflector participants:
If any of y'all use the N8LP tuning relay w/ your K3 and KPA500, I
apprec
prevent my 87A, my second amplifier,
> from transmitting when the antenna is tuning.)
>
> Here, I found it on page 20:
>
>
>
> 73, Jim N7US
>
>
>
> -Original Message-
> From: H. Cary [mailto:h3c...@gmail.com]
> Sent: July 22, 2014 21:09
&
craft-boun...@mailman.qth.net] On Behalf Of H.
Cary
Sent: Wednesday, July 23, 2014 5:32 AM
To: Jim N7US
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] N8LP Tuning Relay w/ K3/KPA500 - help, please
Jim:
I found my "interrupter" and, yes, pin 10 had been removed - I installed it.
Unfortunately,
Hi Cary,
Be careful. Until you get this figured out you can damage your antenna by
pumping high power into it during tuning. I suggest that you switch to a
dummy load while you are experimenting.
You said you have the phono cable running from the relay to the PTT In
connector on the K3. *This is
5 matches
Mail list logo