Re: [Elecraft] NB IF NAR/CODEC

2018-10-08 Thread Bob McGraw K4TAX
I normally start with the IF NB OFF.  Turn on the DSP NB and adjust the level for what I feel is optimum effect.  Then remember the ## and set it to OFF.  Then turn on the IF NB, set it to what I feed is optimum effect.  Then go back to the DSP NB and set it to the previous value.  Best done

Re: [Elecraft] NB IF NAR/CODEC

2018-10-08 Thread Don Wilhelm
Mike, If your noise source has changed, that is adequate reason the NB does not work as it used to. With NB and NR there is no one solution that fits all noise sources. You will just have to experiment a bit to see which settings are most effective. 73, Don W3FPR On 10/8/2018 1:46 PM,

[Elecraft] NB IF NAR/CODEC

2018-10-08 Thread Mike Greenway
I have 2 K3 and a K3S and for some time I have noticed all 3 doing something that seems incorrect. All the radios are all up to correct Rev levels. For years with my normal local noise, I always ran the NB at IF Nar 1-4 most all the time with good success. In recent months, maybe more, on

[Elecraft] NB IF NAR/CODEC

2018-10-08 Thread Mike Greenway
I have 2 K3 and a K3S and for some time I have noticed all 3 doing something that seems incorrect. All the radios are all up to correct Rev levels. For years with my normal local noise, I always ran the NB at IF Nar 1-4 most all the time with good success. In recent months, maybe more, on