Thanks Guys,
Found it! It was as you saiddumb me.
73 de
Jack / W7LD / "Lucky Dog"
- Original Message -
From: "Jack West"
To: "Elecraft Reflector"
Sent: Monday, June 22, 2015 1:42 PM
Subject: [Elecraft] NEED K3 HELP
First problem with my K3 in
Thanks, but that is the problemi have NO Config or Menu to display
73 de
Jack / W7LD / "Lucky Dog"
- Original Message -
From: "Dave Hachadorian"
To: "Reflector Elecraft"
Sent: Monday, June 22, 2015 2:07 PM
Subject: Re: [Elecraft] NEED K3 HELP
a, AZ
-Original Message- From: Jack West
Sent: Monday, June 22, 2015 1:42 PM
To: Elecraft Reflector
Subject: [Elecraft] NEED K3 HELP
First problem with my K3 in five years. I have no MENU or CONFIG display.
NADA... I have an "ERR KEY" display.
I reloaded the latest Software via
: Monday, June 22, 2015 1:42 PM
To: Elecraft Reflector
Subject: [Elecraft] NEED K3 HELP
First problem with my K3 in five years. I have no MENU or CONFIG
display.
NADA... I have an "ERR KEY" display.
I reloaded the latest Software via the K3 utility program,
including the
DSP. I d
Jack - I get that message if I have my straight key depressed upon power up.
Check your key / paddle connections
jim / W6JHB
> On Monday, Jun 22, 2015, at Monday, 1:42 PM, Jack West
> wrote:
>
> First problem with my K3 in five years. I have no MENU or CONFIG display.
> NADA... I hav
ERR KEY means the key jack (or paddle?) is closed as start-up.
Note, that can also mean the DTR or RTS line on the RS-232 port
is being held high if you have CONFIG:CW-PTT set to anything
other than OFF-OFF.
73,
... Joe, W4TV
On 2015-06-22 4:42 PM, Jack West wrote:
First problem with my K
First problem with my K3 in five years. I have no MENU or CONFIG display.
NADA... I have an "ERR KEY" display.
I reloaded the latest Software via the K3 utility program, including the
DSP. I did not see anything wrong in the CONFIGURATION file.
The utiliuty program says the down load was satisfac
7 matches
Mail list logo