Jim,
I do not have a Quadra, but I can think of at least 2 ways to accomplish
what you are trying to do. Neither of which involve using the TUNE button.
1) Switch to CW mode - set the Power knob to the 70 to 80 watt range and
close the key (it does not have to be a key, just a switch or pushbut
No actually you have to set the tun pwr config setting to NOR (I
believe) in order to get that to happen...
On Mon, 2009-09-14 at 11:10 -0700, Ken Roberson wrote:
> Jim,
> This will key the K3 and it will put out whatever power you
> have it set for, I set mine for 55 watts.
> 73 Ken K5DNL
__
On Mon, 9/14/09, jpk5...@cox.net
>
> wrote:
>
> > From: jpk5...@cox.net
>
> > Subject: [Elecraft] Need help operating K3 with Yaesu
> Quadra amplifier
> > To: elecraft@mailman.qth.net
> > Date: Monday, September 14, 2009, 11:26 AM
> > I'm trying to
Jim,
Set the K3 to operate CW in SSB mode first.
Hope this helps
73 Ken K5DNL
--
--- On Mon, 9/14/09, jpk5...@cox.net wrote:
> From: jpk5...@cox.net
> Subject: [Elecraft] Need help operating K3 with Yaesu Quadra amplifier
> To:
I'm trying to find the correct sequence of steps to make
sure my new Quadra amplifier is correctly adjusted to my
K3. I have it hooked through the Band-Data1 8-pin cable
and the Quadra does change bands correctly as it tracks
the K3. The Quadra also switches to the correctly
programmed input
5 matches
Mail list logo