"
Cc: "'Elecraft Reflector'"
Sent: Wednesday, September 01, 2010 6:15 PM
Subject: Re: [Elecraft] New problem switching frequencies and modes with K3
FW 4.05
>I believe this problem is caused by setting the CW WGHT option 5 to VFO
> OFS. Try setting it to VFO NOR and
I believe this problem is caused by setting the CW WGHT option 5 to VFO
OFS. Try setting it to VFO NOR and see if the problem goes away.
I seem to recall having had problems like you are now experiencing when
this option was introduced many versions ago.
73 de Brian/K3KO
Dave Perry N4QS wrot
Dave,
Is there any chance that you are running PowerSDR/IF v 1.10.3.4? It
would cause exactly that kind of frequency shift - even when the buttons
on the K3 were used. The amount of shift was the CW pitch that was set
in PowerSDR/IF.
Upgrade to v1.10.3.5 to fix it.
73,
Don W3FPR
On 9/1/20
My K3 (SN 3132) has been working happily in sync with DX4WIN and N1MM for over
a year now. Normally, when I double click on a spot within the DX spot window
of DX4WIN, the K3 immediately changes to the correct spot frequency and mode.
Same goes with N1MM.
Just a few days ago I noticed that th
4 matches
Mail list logo
