I would recommend you buy one immediately.
Steve
- Original Message -
From: "Adriano Perazio"
To:
Sent: Monday, September 27, 2010 10:07 PM
Subject: [Elecraft] OMNI VII
Hello all
I´m new here and thinking about a O7.
I run almost all the time in SSB contests and DX.
Own a
You should probably ask this question on the Ten-Tec reflector.
73,
Tony W7GO
On 9/27/2010 7:07 PM, Adriano Perazio wrote:
> Hello all
> I´m new here and thinking about a O7.
> I run almost all the time in SSB contests and DX.
> Own a 756 pro 3 but feel it noisy.
> What you guys think about th
Hello all
I´m new here and thinking about a O7.
I run almost all the time in SSB contests and DX.
Own a 756 pro 3 but feel it noisy.
What you guys think about the O7 for that use ?
Tnx
PY2ADR / ZY2C
__
Elecraft mailing list
Home: http://
Not that I'm aware of, but the K3 is VERY transverter friendly :)
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Anthony Rick
Sent: Monday, May 14, 2007 2:37 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] OMNI VII vs Elecraft K3
Than
Looking at the ten tec web site, I cant help thinking their
gear looks like cheap plastic boxes for the money.
They have raised markings for the controls and so on,
but no paint or anything, while the other usual suspects
have brushed gold highlights, etc.
Yes, how well something works is more im
Thank you all for taking the time to write such quality responses. I
received several replies that showed a point-by-point comparison of
both transceivers which was very useful.
Based on features, performance, and price I'm pretty sure I will go
with a K3. One other point worth mentioning is th
Hi Bob,
This is from the FAQ. Hope it answers your question.
73
Greg
With a first IF of around 8 MHz, how can the receiver be
general coverage? Will there not at least be hole in the
coverage around the IF frequency?
General does not mean continuous in this case. There is a
small gap at
On May 14, 2007, at 1:53 PM, Bill W5WVO wrote:
Anthony,
I spent a long time lurking on the OMNI-VII Yahoo group and was
primed to buy one -- until the K3 was announced. In addition to
everything Greg says below, I think the most significant single
difference between the two receivers is
Anthony,
I spent a long time lurking on the OMNI-VII Yahoo group and was primed to buy
one -- until the K3 was announced. In addition to everything Greg says below,
I think the most significant single difference between the two receivers is
that the OMNI-VII uses a typical up-conversion scheme
Hi Anthony,
I can't really answer your question but, I would like to tell you my
experience so far with building a K2. I'm still in the process of building it
but, it is very impressive. The quality of the construction and parts is
outstanding. It also has an all metal case including the fa
Hi Anthony,
This would be difficult to do since the K3 has not hit the
streets yet.
While the VII has an ethernet port for remote control, the
K3 will have an extensive array of remote capabilities
built into its updatable firmware.
The K3 receiver specs should be vastly better than the
V
I am a long time Ten Tec user interested in upgrading. I have never
used a piece of Elecraft equipment but am very intrigued by the K3.
Are there any Elecraft users who can give me some advice about what I
may expect from the K3 vs the OMNI VII since they are both near the
same price?
Thanks,
An
12 matches
Mail list logo
