> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Ron
> D'Eau Claire
> Sent: Sunday, July 09, 2006 1:52 AM
> To: elecraft@mailman.qth.net
> Subject: RE: [Elecraft] Optimising the PA stages
>
> There is an optimizing
There is an optimizing mod to one toroid for the K2 IF you are going to work
at 5 watts or less, maximum. It'll reduce the xmit current a bit to help
those using he QRP K2 with internal batteries. The flip side is that the rig
is less efficient at higher levels.
It's on the Elecraft web site (www
Hi All
Ser Nr 5544 is now alive and kicking.
When doing the Align/Test P III with the referenced power level setting of
10.0W I find the current level hovering around the upper limit of the
recommended range at 2.0 amps although I did not see any Hi Current
warnings.
All the RX/TX alignment also
3 matches
Mail list logo