Dan,
Set the power at 6 watts, then adjust the audio drive so you get 5 watts
output. You can also watch the ALC, with the ALC/RF on ALC. It should
just begin to flicker on the far right hand side. Press and hold ANT 1/2
and TUNE to read power forward power/reflected power. The display
Question about transmitter drive setup.
I'm about to go on the air with the K2 Power knob full clockwise, and the
soundcard drive (Digipan) set for about 1A draw on key down. Is that right?
Dan / WG4S / K2 #2456 with KPSK2, er, ah KSB2
___
Elecraft
I never ran across that method .. what I did (and seems to work OK and
sound reasonable) is to set power knob to desired power, then adjust
sound card level to just where agc blinks first LED ..
de John W1RT #3906
On Sat, 13 Nov 2004 15:52:33 -0500, Dan Barker [EMAIL PROTECTED] wrote:
Question
Ha! I fire up PSK31 from time to time, make a contact, then it's back to CW
for the next six months!
Some modes, like some gear, are fun to tinker with in order to master the
techniques of making them work, but that doesn't mean that I'll enjoy using
them on the air all that much.
As for
and pcoutput just at
droppoint.
Nothing sounds wrong on other rx in schack. No harmonics.
73 de Tom LA1PHA
- Original Message -
From: Dan Barker [EMAIL PROTECTED]
To: Elecraft elecraft@mailman.qth.net
Sent: Saturday, November 13, 2004 9:52 PM
Subject: [Elecraft] PSK31 question
5 matches
Mail list logo
