Ariel,
If you regularly use the STL menu for adjusting the sidetone to match
the signal AF level, I suggest that you change that habit - it is very
easy to tap DISPLAY in the process and change the sidetone source.
As an alternative, set the Sidetone level to an intermediate value, and
use t
: elecraft reflector
Subject: Re: [Elecraft] RS232 Connection on K2 Lost
Ariel,
Check to see if your K2 has sidetone - if it does not, the answer is
easy, your sidetone source is incorrect.
In case this is the problem, the solution is to enter the menu for ST L
and edit the parameter (hold EDIT), then
Ariel,
Check to see if your K2 has sidetone - if it does not, the answer is
easy, your sidetone source is incorrect.
In case this is the problem, the solution is to enter the menu for ST L
and edit the parameter (hold EDIT), then tap DISPLAY until you hear
sidetone - the display should flash U
I seemed to have lost RS232 Connection on K2 to my laptop. The device driver
appears to be working according to Windows. My K2remote program appears to see
the test signal from the K2 using the secondary menu. HyperTerminal can also
see the test signal from the K2 but that is about it. Has a
4 matches
Mail list logo