This would only apply to the lower-power settings, Kent. The "H"
settings only apply to the K2's main antenna jack.
73,
Wayne
N6KR
On Jan 17, 2006, at 3:06 PM, Kent Tannery wrote:
I am now curious if the "Y" RCA cable connector on the K2's
Transverter option will also work for the menu setti
I am now curious if the "Y" RCA cable connector on the K2's Transverter option
will also work for the menu setting of "High Power" on the Transverter (H0.1 -
H12.7 watts) or does this only apply for the Low Power setting of milliwatts?
Kent
KD5SHM
wayne burdick <[EMAIL PROTECTED]> wrote:
True enough, Don. Thanks for mentioning this.
Of course the external "Y" cable has the advantage of being quickly
removed if one wanted to use a different transverter.
73,
Wayne
N6KR
On Jan 17, 2006, at 7:00 AM, Don Wilhelm wrote:
A short jumper wire across the connector wiring points on th
A short jumper wire across the connector wiring points on the K60XV board
would do the same as the Y adapter and be just as easy - one less connector
point to cause future problems IMHO.
73,
Don W3FPR
> -Original Message-
> Kent Tannery wrote:
>
> > I am trying to use my K2/100 (K60XV t
Kent Tannery wrote:
I am trying to use my K2/100 (K60XV transverter interface installed)
with a Down East Microwave 900mhz transverter which has only a
"common" IF (not a TX IF and RX IF). The transverter requires low
power IF around 0.10 miliwatts. (Transmitting has been tested and
works f
5 matches
Mail list logo