[Elecraft] RXant, NGen while tuning filters?

2007-04-12 Thread Jim Miller
I'm getting ready to use Spectrogram to set my filters. It would seem that putting NGen on the RxAnt input would be a nice safe way to use it since no transmit signal could accidentally blow it out. Any reason that wouldn't work while setting the filters with Spectrogram? 73 jim ab3cv

Re: [Elecraft] RXant, NGen while tuning filters?

2007-04-12 Thread Don Wilhelm
Jim, That would work just fine - set RANT ON, and don't forget to set it OFF again after you are finished. The other way is to set CW TEST on (press the VOX button while in CW mode). 73, Don W3FPR Jim Miller wrote: I'm getting ready to use Spectrogram to set my filters. It would seem that

Re: [Elecraft] RXant, NGen while tuning filters?

2007-04-12 Thread Jim Miller
good stuff! tnx jtm ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] RXant, NGen while tuning filters?

2007-04-12 Thread Brian Mury
On Thu, 2007-04-12 at 09:46 -0400, Don Wilhelm wrote: The other way is to set CW TEST on (press the VOX button while in CW mode). CW TEST on, *and* turn the power all the way down, *and* unplug the key/paddle. Belt and suspenders! ;-) ___ Elecraft

Re: [Elecraft] RxAnt?

2007-04-09 Thread Joe-aa4nn
Put the RANT ON function under one of the PF keys to quickly switch it on and off. de Joe, aa4nn - Original Message - From: Jim Miller [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: Elecraft@mailman.qth.net Sent: Sunday, April 08, 2007 11:32 PM Subject: Re: [Elecraft] RxAnt? excellent

[Elecraft] RxAnt?

2007-04-08 Thread Jim Miller
My K2 is working fine and I'm still learning about its capabilities. I bought and installed the 160M option not realizing it's full potential. If I understand correctly the receive antenna port which it provides is protected during transmit (QSK) just as the ANT1/2 ports. Is that correct? If

Re: [Elecraft] RxAnt?

2007-04-08 Thread Don Wilhelm
Jim, That is correct - and you can confirm from the schematic if you like. The receive antenna is connected on the same side of the T-R switch as the PA transistor output. (the receive antenna is injected at the same place the W1 jumper is placed in a K2 without the K160RX option.) The

Re: [Elecraft] RxAnt?

2007-04-08 Thread Jim Miller
excellent, thanks! this is going to be fun! jim ab3cv ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.):