I have had my K3 on the air for about a month now. I operate 95% CW and feel
comfortable with how to operate this rig on the air in that regard. I have
not had much time to spend getting acclimated with the rig on SSB until this
weekend.
I spent a great deal of time my first week adjusting my EQ
Sounds like you have somehow mis-configgured your filter(s).
Try using the K3 Utility and verify your filter settings. Make sure
you have selected the 2.7 KHz filter for SSB TX. Can we assume you have
a 400 hz filter installed for CW?
...bill nr4c
On Mon, 23 Jul 2012 05:33:20 -0700 (PDT),
Sounds like you need to check the TX Equalizer settings. Tap Menu and scroll to
TX EQ. There are 8 EQ bands. Many people seem to have good luck with bands 1&2
set to -16, bands 3-7 around 0, and band 8 at -6 or so. Select each band by
tapping 1-8 and adjust using the VFO A knob.
More informati
I can think of two possibilities.
1) You do not have the offset correctly recorded for the 2.7 filter Be
certain it is correct (matches the marking on the filter) either in the
K3 menu or K3Utility.
2) You cut too much of the 400 Hz band in TX EQ. Normally there should
be no reduction for band
...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Monday, July 23, 2012 6:18 AM
To: ac8jd
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] SSB Bandwiedth adjust
I can think of two possibilities.
1) You do not have the offset correctly recorded for the 2.7
5 matches
Mail list logo
