One last post and we're done.
I think we have a winner. Josh, W6XU, had asked me earlier whether I had TX
Inhibit disabled. I assumed in the KPA500, he was unaware of that function but
was thinking about the inhibit in the K3, I hadn't thought of that one.
So I had sort of a perfect storm
Thanks to all who offered suggestions. Rather than many individual replies, I'll
just add further comments here.
The SS-USB-100 USB-to-Serial converter (Prolific chipset) is definitely bad. As
I said it worked fine before but is flaky now.
With the Edgeport 4-port, FT8 works fine and I can
I had these exact symptoms. It turned out that Tx Inhibit was enabled, but the
hardware line was left floating.
73,
Josh W6XU
Sent from my mobile device
>
> ...there are instances where I go to transmit and find the TX test mode is
> enabled. Furthermore, the front panel switch will not
On 9/8/2017 2:47 PM, Wes Stewart wrote:
Any ideas?
Only a WAG, Wes. All of the Elecraft radios write their current setup to
RAM when you turn off the radio with its own power switch, and the next
time the radio is turned on, that setup is applied. If, however, you
remove DC power from the
I've had to remove my K3S from the station again for repair. I've resurrected my
old K3 to fill in. (Always have a spare)
Since the last time this happened, I've ventured into FT8 operating and I noted
that when I used my USB to Serial converter that always worked fine in the past,
FT8 was
5 matches
Mail list logo