RE: [Elecraft] Using K2 with broken D1 on the K60XV

Of Michael Jensen Sent: Friday, January 06, 2006 1:55 PM To: [EMAIL PROTECTED]; 'Elecraft Reflector' Subject: Re: [Elecraft] Using K2 with broken D1 on the K60XV Hi Don Thanks for confirming me on the use with the broken pin Diode. For the issue with S meter i did not explain the case very good

[Elecraft] Using K2 with broken D1 on the K60XV

Hi During last night trying to finish op the asssembly of the K60XV i faced MHz) the S the transverter band n i was looking for bad soldering components. I did hit D1, the pind diode that ofca have ofcause placed an

RE: [Elecraft] Using K2 with broken D1 on the K60XV

Michael, You are correct - the PIN doides D1 and D2 form the T/R switch for the low power output. If you do not use the low power output, you can operate the K2 from the normal BNC antenna jack as usual without that diode installed. The number of bars on the K2 LED during transmit indicate the