What is involved in setting up WINMOR (RMS Express) to run with the K3?
I currently have it working on a Yaesu FT-897D, through a Tigertronics
SignaLink unit. That was pretty easy to set up, except that I had to find
someone with a similar setup to tell me what the rig settings should be.
Can an
I have an E-MU 0204 on order, Chen. I paid $130. It looks to me like an 0202
with two additional outputs. It has the same specs and ADC as the 0202, and
apparently replaces the 0202. Once I test and verify it's operation, I
expect it will become the standard card for LP-PAN. I also expect the pric
On 12/13/2010 12:49 PM, Andrew Meyer wrote:
> My main reason for this email to the reflector, is for help on the cable
> types and connections and/or an article that explains the setup and
> configuration that works. I had considered using a Signal Link but is there
> really any reason to do so?
On Dec 13, 2010, at 12:49 PM, Andrew Meyer wrote:
> I had considered using a Signal Link but is there really any reason to do so?
In your case, there is no reason unless the K3's turn around time is too slow
for Winmor when using the built-in VOX. You'll have to check that part out.
The Signa
I want to use the K3 and my dedicated laptop which has a Soundmax Digital
Audio soundcard for Winmor. From the K3 manual, it seems like it's a simple
matter of hooking the computer and K3 together correctly, doing the K3
config, and of course having the Winmor software installed. From what I can
5 matches
Mail list logo
